PIX-X'set® Classical / Wedge / Narrow Section Belts

Experience the product

Our stunning interactive 3D Belt model allows viewers to get a hands-on experience with products by allowing them to view them from any angle or scale with rich rendering.

Features

  • Special CR treated outer jacketing fabric for higher durability
  • Anti-static, oil & heat resistant
  • Maximum Belt linear speed (Classical section: up to 30 m/sec, Wedge section: up to 42 m/sec, Narrow section: up to 45 m/sec)
  • ATEX certified FRAS Belts are also available
  • Temperature range: -30°C to +80°C

Constructional Details

  1. Wear-resistant bias-cut neoprene rubberised polyester cotton fabric
  2. High tensile cord embedding cushion rubber compound
  3. High tenacity, low stretch, specially treated polyester cords
  4. Especially compounded high modulus compression rubber

Notes

  • Intermediate sizes are available upon request
  • Aramid cord construction Belts are available upon request

Reference Standard

  • IS 2494, BS 3790, ISO 4184, DIN 2215-1975, RMA IP-22, RMA IP-23, DIN 7753

Applications

Industrial drives, Generators, Blowers, Ball-mills, Rolling mills, Crushers, Compressors, Pumps, Wet grinders, Household appliances, Cement


Product Range

Section Top Width (mm) Thickness (mm) Angle (Degree) Min. Pulley Dia. (mm) Manufacturing Range Belt Length Factor (mm) Length Desg.
Min. (inch / mm) Max. (inch / mm) Lp to La Li to Lp Li to La
Classical Section
8 8.0 5.0 40 40 39" 170" 12
 19
 31
 Li
Z 10.0 6.0 40
 45 18" 170" 16
 22
 38
 Li
A 13.0 8.0 40
 71
 18" 256" 14
 36
 50
 Li
B 17.0 11.0 40
 112 18" 927" 26
 43
 69
 Li
20 20.0 13.0 40
 160 31.5" 927" 31
 48
 79
 Li
C 22.0 14.0 40 180 31" 927" 32
 56
 88
 Li
25 25.0 16.0 40 250 57" 256" 39
 61
 100
 Li
D
 32.0 19.0 40 355 44.5" 927" 40
 79
 119
 Li
E 38.0 23.0 40
 500 90" 927" 53
 92
 145
 Li
Wedge Section
SPZ 10.0 8.0 40 63 479mm 4025mm 13
 37
 50
 Lp
SPA 13.0 10.0
 40 90
 576mm 9087mm 18
 45
 63
 Lp
SPB 17.0 14.0
 40 140 1000mm 23606mm 28
 60
 88
 Lp
19 19.0 15.0 40 180
 2253mm 9111mm 25
 69
 94
 Lp
SPC 22.0 18.0
 40 224 1861mm 23629mm 30
 83
 113
 Lp
Narrow Section
3V 9.7 8.0 40 63 19.5" 159" 13
 37
 50
 La
5V 15.8 14.0
 40 140 47" 930" 25
 60
 85
 La
8V 25.4 23.0
 40 335 100" 933" 53
 92
 145
 La
Light Duty Single V-Belts
3L 9.7
 5.6
 40
 45
 19.5" 171.5" 16
 22
 38
 La
4L 12.7
 7.9
 40 65
 20" 358" 14
 36
 50
 La
5L 16.7
 9.7
 40 91
 21" 242" 26
 43
 69
 La

PIX-X'set® Classical Belts

  • Top width to height ratio 1.6:1
  • Maximum recommended Belt speed is 30 m/s
  • Permissible flex rate f=80 per second

They are primarily used in industrial drives. Classical Belts are recommended in special applications such as V-flat drives. These Belts are advantageous where reverse idlers have to be used, because of the smaller thickness.

PIX-X'set® Wedge section Belts

  • Top width to height ratio: 1.2:1
  • Maximum recommended Belt speed: 42 m/s
  • Permissible flex rate f=100 per second

Commonly used because of the space savings achieved by using these Belts. They are used extensively in most of the industrial applications ranging from a light-duty application drive to heavy load applications such as crusher drives. 

PIX-X'set® Narrow section Belts

  • Maximum recommended Belt speed is 45 m/s*
  • The Maximum flex rate is f=100 per second
  • For Belt speed more than 45 m/sec,
    pulleys must be dynamically balanced

These are the standard section Belts used in USA and Canada, therefore they are primarily used in the machines exported to or from these countries. 8V section Belts are used in heavy-duty applications, for example, stone crushers. 


Product Label


Related Products