Toothed Belts

Toothed Belt or Moulded Raw Edge Cogged Belt is a V-Belt with moulded teeth on its inner surface.Toothed Belts offer more flexibility compared to the Wrap construction Belts and the tooth profile allows the accumulation of air pockets into it, which acts as heat absorber and prevents the temperature of the drive to enhance, during operation.

In the case of toothed Belts the teeth which run perpendicular to the Belt length reduces the bending stress over the Belt, they run cooler, lasts longer, and have a substantial operational efficiency compared to Wrap construction Belts. Toothed Belts can be used over the same pulleys as equivalently rated Wrap construction Belt Pulley.Toothed Belts are used in a wide array of mechanical devices, where high power transmission is desired.

PIX offers a wide range of toothed Belts of various profiles, such as; ZX, AX, BX, CX, DX; Classical sections. XPZ, XPA, XPB, XPC, Wedge Belt sections.  3VX, 5VX, 8VX; Narrow sections and 2LX, 3LX, 4LX, 5LX; Light-duty sections.

Besides the standard sections of toothed Belts, PIX also offers the High-power, maintenance-free Muscle series of Belts, which delivers high-power and are maintenance-free, offering compact drives.

PIX-X'tra® Moulded Raw Edge Cogged Belts

Experience the product

Our stunning interactive 3D Belt model allows viewers to get a hands-on experience with products by allowing them to view them from any angle or scale with rich rendering.

Features

  • Higher power transmission capacity than wrapped Belts
  • Special cog design for enhanced flexibility and heat dissipation rate
  • Suitable for drives using smaller diameter pulleys and high RPM
  • Anti-static, oil & heat resistant
  • Maximum Belt linear speed (Classical section: up to 30 m/Sec, Wedge: up to 42 m/Sec, Narrow: up to 45 m/Sec)
  • Temperature range: -25°C to +100°C

Constructional Details

  1. Special fabric layer
  2. Cushion rubber compound
  3. Specially treated & stabilized polyester cord
  4. Fiber-filled base compound
  5. Moulded cogs for better flexibility

Notes

  • Intermediate sizes are available upon request
  • Aramid cord construction Belts are available upon request

Reference Standard

IS 2494, BS 3790, ISO 4184, RMA IP 22, RMA IP 23


Applications

Compressors, Pumps, Fans, Vacuum pumps, Blowers, Generators, Heat exchanger, Industrial drives, etc.


Product Range

Section Top Width (mm) Thickness (mm) Angle (Degree) Min. Pulley Dia. (mm) Manufacturing Range Belt Length Factor (mm) Length Desg.
Min. (inch / mm) Max. (inch / mm) Lp to La Li to Lp Li to La
Classical Section
ZX
10.0 6.0 36 40.0 21.5" 200" 16
22
38
Li
AX 13.0 8.0 36 63.0 21.5" 200" 14
36
50
Li
BX 17.0 11.0 36 90.0 21.5" 330" 26
43
69
Li
CX 22.0 14.0 36 140.0 23.5" 330" 32
56
88
Li
DX 32.0 19.0 38 280.0 40.0" 200" 40
79
119
Li
Wedge Section
XPZ 10.0 8.0 36 56.0 550mm 5000mm 13
37
50
Lp
XPA 13.0 10.0 36 71.0 550mm 5000mm 18
45
63
Lp
XPB 16.3 14.0 36 112.0 550mm 8380mm 28
60
88
Lp
XPC 22.0 18.0 38 180.0 600mm 8380mm 30
83
113
Lp
Narrow Section
3VX 9.7 8.0 38 56.0 21.5" 200" 13
37
50
La
5VX
15.8 13.5 38 112.0 21.5" 330" 25
60
85
La
8VX 25.4 23.0 38 254.0 90" 330" 53
92
145
La
Light Duty Single V-Belts
3LX 9.7
5.6
36 36.0
21.5" 200" 16
22
38
La
4LX 12.7
7.9
36 58.0
21.5" 200" 14
36
50
La
5LX 16.7
9.7
38 72.0
21.5" 200" 26
43
69
La

Product Label


Related Products