Double Timing Belts
PIX-Duo®-XT Double Timing Belts are specially designed with teeth on both sides to provide two driving surfaces in positive drive applications. Double Timing Belt ensures positive engagement and synchronized power transmission capacity from both sides.
Double Timing Belts offer alternative solutions to gears & roller chains with multi-pulley and reverse rotation drives.Double Timing Belts provide power capacity equal to its single counterpart ensuring the same load carrying capabilities and maximum Belt life.Double Timing Belts suitable for rotation reversal, multi-point drives, serpentine drives and other unique drive designs.Having teeth on both sides, they can transmit power and synchronize the motion of multiple shafts in serpentine drives and also accommodate shafts turning in opposite directions.
PIX offers a wide range of Double Timing Belts in various sections, such as - DA-XL, DA-L, DA-H, DA-3M, DA-5M, DA-8M, DA-14M, DA-S5M, DA-S8M.
PIX-Duo®-XT Twin-power, Double-sided, Timing Belts
Experience the product
Our stunning interactive 3D Belt model allows viewers to get a hands-on experience with products by allowing them to view them from any angle or scale with rich rendering.
- Facilitates power transmission from both sides of the Belt
- Highly flexible
- Extended stability, durability, strength and life
- Temperature range: -25°C to +100°C
- High wear resistance nylon stretchable fabric offers great strength to the teeth profile for longer service life.
- Centre corded special treated glass cord for high strength & negligible elongation
- Fibre loaded compression rubber for dimensional stability to minimize the noise
DA-8M and DA-S8M Belt sections are available in PIX-TorquePlus®-XT2 (High-power) construction also
ISO 13050, ISO 5296
Textile units, Paper packaging & printing machines, Hand-held power tools, Food processors, Office equipment, Currency counting machines, Medical diagnostic equipment, Vending machines, Robotics, Lawn & garden, Vacuum cleaners, etc.
|Section||Pitch(mm)||Tooth Height 'b' (mm)||Belt Thickness 'c' (mm)||Manufacturing Range||Length Designation|
|DA-3M||3.000||1.17||3.10||501 mm||1401 mm||Lp|
|DA-5M||5.000||2.06||5.26||400 mm||3200 mm||Lp|
|DA-8M||8.000||3.48||8.17||512 mm||4400 mm||Lp|
|DA-14M||14.000||6.02||14.8||1400 mm||6860 mm||Lp|
|DA-S5M||5.000||1.91||5.00||410 mm||3200 mm||Lp|
|DA-S8M||8.000||3.05||7.50||512 mm||6640 mm||Lp|